rev. date: 11-jan- 13 ksd-t5c100-001 www .auk.co.kr 1 of 6 2N7002B n-channel enhancement mode mosfet high speed switching application features ? esd rating: 2000v (hbm) ? low on-resistance: r ds(on) < 3 ? @ v gs = 10v ? high power and current handling capability ? very fast switching ? rohs compliant device applications ? high speed line driver ordering information part number marking code package packaging 2N7002B 7b2 sot-23 tape & reel marking information absolute maximum ratings (t amb =25 , unless otherwise specified) characteristic symbol ratings unit drain-source voltage v ds 60 v gate-source voltage v gs ? 20 v maximum drain current (note 1) i d 300 ma pulsed drain current (note 1) i dp 800 ma power dissipation (note 2) p d 350 mw operating junction temperature t j 150 ? c storage temperature range t stg -55 ~ 150 ? c thermal resistance junction to ambient (note 2) r th(j-a) 350 ? c/w note 1) limited only maximum junction temperature note 2) device mounted on fr-4 board with recommended pad layout. 7b2 = specific device code = year & week code marking sot-23 7b2
rev. date: 11-jan- 13 ksd-t5c100-001 www .auk.co.kr 2 of 6 electrical characteristics (t amb =25 , unless otherwise specified) characteristic symbol test condition min. typ. max. unit drian-source breakdown voltage bv dss i d =250 ? a, v gs =0 60 - - v gate-source breakdown voltage bv gss i g =250 ? a, v ds =0 20 - - v gate-threshold voltage v gs(th) i d =250ua, v ds =v gs 1 - 2.5 v zero gate voltage drain current i dss v ds =60v, v gs =0 - - 1 ? a gate-body leakage i gss v gs = ? 5v, v ds =0v - - ? 100 na v gs = ? 10v, v ds =0v ? 450 na v gs = ? 20v, v ds =0v ? 10 ? a drain-source on-resistance (note 3) r ds(on) v gs =10v, i d =0.5a - - 3 ? v gs =5v, i d =0.05a - - 3.5 forward trans-conductance (note 3) g fs v ds =10v, i d =0.2a 0.08 - - s input capacitance c iss v ds =25v, v gs =0, f=1mhz - 30 50 pf output capacitance c oss - 7 - reverse transfer capacitance c rss - 4 - turn-on delay time (note 3, 4) t d(on) v dd =30v, i d =0.2a, v gs =10v, r g =10 ? - 2 - ns rise time (note 3, 4) t r - 15 - turn-off delay time (note 3, 4) t d(off) -- 8 - fall time (note 3, 4) t f - 11 - total gate charge (note 3, 4) q g v ds =10v, i d =0.25a, v gs =4.5v - 0.6 0.8 nc gate-source charge (note 3, 4) q gs - 0.2 - gate-drain charge (note 3, 4) q gd - 0.2 - diode forward voltage (note 3) v sd v gs =0v, i s =0.2a - - 1.3 v note 3) pulse test: pulse width 300us, duty cycle 2% note 4) essentially independent of operating temperature typical characteristics. 2N7002B
rev. date: 11-jan- 13 ksd-t5c100-001 www .auk.co.kr 3 of 6 electrical characteristics curves fig. 1 i d - v ds fig. 2 i d ? v gs fig. 3 r ds(on) - i d fig. 4 i s - v sd fig. 5 capacitance - v ds fig. 6 v gs - q g 2N7002B
rev. date: 11-jan- 13 ksd-t5c100-001 www .auk.co.kr 4 of 6 2N7002B fig. 7 v dss - t j fig. 8 r ds(on) ? t j fig. 9 i d - t c fig. 10 safe operating area fig. 11 transient thermal impedance
rev. date: 11-jan- 13 ksd-t5c100-001 www .auk.co.kr 5 of 6 package outline dimensions recommend pcb solder land (unit: mm) 2N7002B
rev. date: 11-jan- 13 ksd-t5c100-001 www .auk.co.kr 6 of 6 the auk corp. products are intended for the use as components in general electronic equipment (office and communication e quipment, measuring equipment, home appliance, etc.). please make sure that you consult with us before you use these auk corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safet y device, etc.). auk corp. cannot accept liability to any damage which may occur in case these auk corp. products were used in the mentioned equi pments without prior consultation with auk corp.. specifications mentioned in this publicati on are subject to change without notice. 2N7002B
|